По ту сторону объектива
- Писец Хираганой
- Бывалый
- Сообщения: 6922
- Зарегистрирован: 02 ноя 2014 07:05
- Пол: ♂
- Гепатит: С ушел в минус
- Генотип: не типируется
- Город: San Francisco
- Благодарил (а): 1687 раз
- Поблагодарили: 1317 раз
- Писец Хираганой
- Бывалый
- Сообщения: 6922
- Зарегистрирован: 02 ноя 2014 07:05
- Пол: ♂
- Гепатит: С ушел в минус
- Генотип: не типируется
- Город: San Francisco
- Благодарил (а): 1687 раз
- Поблагодарили: 1317 раз
- Писец Хираганой
- Бывалый
- Сообщения: 6922
- Зарегистрирован: 02 ноя 2014 07:05
- Пол: ♂
- Гепатит: С ушел в минус
- Генотип: не типируется
- Город: San Francisco
- Благодарил (а): 1687 раз
- Поблагодарили: 1317 раз
По ту сторону объектива



Сегодня на закате увидел два странных объекта. Не кляксы и не птицы, нечто непонятное. Автофокус в норме
From Vandenberg to Ares
- Sovok-59
- Гуру
- Сообщения: 89774
- Зарегистрирован: 25 ноя 2010 12:11
- Пол: ♂
- Гепатит: С ушел в минус
- Фиброз: F1
- Генотип: 1
- Город: Челябинск
- Благодарил (а): 2111 раз
- Поблагодарили: 9406 раз
По ту сторону объектива
Забайкалье














- Писец Хираганой
- Бывалый
- Сообщения: 6922
- Зарегистрирован: 02 ноя 2014 07:05
- Пол: ♂
- Гепатит: С ушел в минус
- Генотип: не типируется
- Город: San Francisco
- Благодарил (а): 1687 раз
- Поблагодарили: 1317 раз
- Писец Хираганой
- Бывалый
- Сообщения: 6922
- Зарегистрирован: 02 ноя 2014 07:05
- Пол: ♂
- Гепатит: С ушел в минус
- Генотип: не типируется
- Город: San Francisco
- Благодарил (а): 1687 раз
- Поблагодарили: 1317 раз
По ту сторону объектива
nen тут рассказано как инфракрасный датчик подсоединить к камере
Key Considerations for Connecting an Ophir LWIR Lens to a Raspberry Pi 3 (R3) SystemLens Compatibility with Camera Module:Ophir LWIR lenses are designed for specific thermal camera modules, such as the Teledyne FLIR Boson, which uses a 12 µm uncooled detector (available in 640×512 or 320×256 resolutions). These lenses feature precise optomechanical designs to ensure crisp imaging with Modulation Transfer Function (MTF) close to the diffraction limit.
To use an Ophir LWIR lens, you need a compatible thermal camera module. The FLIR Boson, for example, supports multiple lens configurations and industry-standard interfaces like USB, MIPI, or CameraLink, which can be integrated with a Raspberry Pi 3.
Confirm the lens mount and FPA format of your Ophir lens (e.g., designed for VGA, XGA, or SXGA detectors) and ensure it matches the camera module’s specifications.
Interfacing with Raspberry Pi 3:The Raspberry Pi 3 (R3) does not natively support thermal camera modules like the FLIR Boson or Tau 2. You’ll need an intermediary interface or adapter to connect the camera module to the Raspberry Pi’s GPIO, USB, or MIPI CSI interface.
For example, the FLIR Boson supports USB3, MIPI CSI-2, or CameraLink interfaces. A USB interface board or a MIPI-to-CSI adapter (if compatible with the Raspberry Pi’s CSI port) would be required. The Boson SDK and documentation provide guidance on integration, including software for image processing.
If “RF adapter” refers to a specific interface or breakout board (e.g., a USB-to-MIPI adapter or a custom PCB), you’ll need to verify its compatibility with both the camera module and the Raspberry Pi 3. No direct reference to an “RF adapter” was found in the context of Ophir lenses or FLIR modules, suggesting it might be a misnomer or a specific component not covered in the provided sources.
Key Considerations for Connecting an Ophir LWIR Lens to a Raspberry Pi 3 (R3) SystemLens Compatibility with Camera Module:Ophir LWIR lenses are designed for specific thermal camera modules, such as the Teledyne FLIR Boson, which uses a 12 µm uncooled detector (available in 640×512 or 320×256 resolutions). These lenses feature precise optomechanical designs to ensure crisp imaging with Modulation Transfer Function (MTF) close to the diffraction limit.
To use an Ophir LWIR lens, you need a compatible thermal camera module. The FLIR Boson, for example, supports multiple lens configurations and industry-standard interfaces like USB, MIPI, or CameraLink, which can be integrated with a Raspberry Pi 3.
Confirm the lens mount and FPA format of your Ophir lens (e.g., designed for VGA, XGA, or SXGA detectors) and ensure it matches the camera module’s specifications.
Interfacing with Raspberry Pi 3:The Raspberry Pi 3 (R3) does not natively support thermal camera modules like the FLIR Boson or Tau 2. You’ll need an intermediary interface or adapter to connect the camera module to the Raspberry Pi’s GPIO, USB, or MIPI CSI interface.
For example, the FLIR Boson supports USB3, MIPI CSI-2, or CameraLink interfaces. A USB interface board or a MIPI-to-CSI adapter (if compatible with the Raspberry Pi’s CSI port) would be required. The Boson SDK and documentation provide guidance on integration, including software for image processing.
If “RF adapter” refers to a specific interface or breakout board (e.g., a USB-to-MIPI adapter or a custom PCB), you’ll need to verify its compatibility with both the camera module and the Raspberry Pi 3. No direct reference to an “RF adapter” was found in the context of Ophir lenses or FLIR modules, suggesting it might be a misnomer or a specific component not covered in the provided sources.
From Vandenberg to Ares
- Писец Хираганой
- Бывалый
- Сообщения: 6922
- Зарегистрирован: 02 ноя 2014 07:05
- Пол: ♂
- Гепатит: С ушел в минус
- Генотип: не типируется
- Город: San Francisco
- Благодарил (а): 1687 раз
- Поблагодарили: 1317 раз
-
- Местный
- Сообщения: 536
- Зарегистрирован: 06 мар 2016 14:38
- Пол: ♂
- Гепатит: В
- Генотип: D
- Город: Питер
- Благодарил (а): 139 раз
- Поблагодарили: 96 раз
По ту сторону объектива
не так то просто по координатам найти место, сначала нужно конвертить в десятичные, и вот только потом. Далеко забрался))) комары сильно кусаются?
-
- Местный
- Сообщения: 536
- Зарегистрирован: 06 мар 2016 14:38
- Пол: ♂
- Гепатит: В
- Генотип: D
- Город: Питер
- Благодарил (а): 139 раз
- Поблагодарили: 96 раз
По ту сторону объектива
прикольно тут текстура воды получилась. Но снимок темноват, значит выдержка минимальная, а диафрагма максимум. Чего то не хватило. Это авто или ручником, какой аппарат?
-
- Местный
- Сообщения: 536
- Зарегистрирован: 06 мар 2016 14:38
- Пол: ♂
- Гепатит: В
- Генотип: D
- Город: Питер
- Благодарил (а): 139 раз
- Поблагодарили: 96 раз
По ту сторону объектива
привык уже к аглицкому, легко читаешь, как вообще с языком пошло?Писец Хираганой писал(а): ↑02 июл 2025 14:04 Key Considerations for Connecting an Ophir LWIR Lens to a Raspberry
- Писец Хираганой
- Бывалый
- Сообщения: 6922
- Зарегистрирован: 02 ноя 2014 07:05
- Пол: ♂
- Гепатит: С ушел в минус
- Генотип: не типируется
- Город: San Francisco
- Благодарил (а): 1687 раз
- Поблагодарили: 1317 раз
По ту сторону объектива
Это потому что ночью снимал звезды и ещё не привык к этой камере
Что у нее все вручную/так что не переключил цвета температуры.
Да интересноконечночто у профессиональной камеры авто режим отсутствует.
После бассейна как раз понял что колор надо ставить на авто
Это на второй день как забрал с почты р3
Удивительно что камера указана была как сильно б/у а оказалась полностью новая
По счетчику меньше двух тысяч было снимков.
Это меньше сотой процента от нормального гарантированного количества
С таким шатер квантом ее можно за 4000 продать
Фото авто это на телефон
Смешной пикапчик



From Vandenberg to Ares